BSFKJ - CORORESIST 19300

  • MSDS: BSFKJ
  • Manufacturer: EUTECTIC CORP
  • Product Name: CORORESIST 19300
  • National Stock Number: 3439-01-078-9174
Product Identification

Product ID:CORORESIST 19300
MSDS Date:05/01/1986
FSC:3439
NIIN:01-078-9174
MSDS Number: BSFKJ

Responsible Party
EUTECTIC CORP
40-40 172ND ST
FLUSHING, NY 11358
US

Cage: 72271

Contractor
EUTECTIC CORP
CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

Ingredients

IRON

CAS: 7439-89-6

RTECS: NO4565500


CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9394

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9394


MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

OSHA PEL C 5 MG/M3

ACGIH TLV: 5 MG/M3, DUST; 9394


MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMPTOMS (OVEREXPOSURE).
Explanation of Carcinogenicity:THIS MATERIAL CONTAINS NICKEL AND
CHROMIUM.
Effects of Overexposure:ACUTE: OVEREXPOSURE TO DUSTS MAY RESULT IN
DISCOMFORT SUCH AS DIZZINESS, NAUSEA, OR DRYNESS OR IRRITATION OF
NOSE, THROAT OR EYES. INHALATION OF FUMES CAN CAUSE IRRITATION OF
THE RESPIRATORY SYSTEM, D AMAGE TO THE LUNGS, AND ASTHMA LIKE
SYMPTOMS. INGESTION COULD BE FATAL. METALLIC TASTE IN THE MOUTH.
SIDEROSIS POSSIBLE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:REMOVE TO WELL-VENTILATED AREA. CALL FOR MEDICAL AID. EMPLOY
FIRST-AID TECHNIQUES RECOMMENDED BY THE AMERICAN RED CROSS. WASH
EYES AND SKIN WITH WATER TO REMOVE DUSTS. IF MATERIAL IS INGESTED,
SEEK I MMEDIATE MEDICAL ATTENTION.

Fire Fighting

Extinguishing Media:AS APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:THIS PRODUCT IS NON-FLAMMABLE UNDER NORMAL
WORKING CONDITIONS.
Unusual Fire/Explosion Hazard:METAL POWDER DUST MAY PRESENT A FIRE OR
EXPLOSION HAZARD UNDER FAVORABLE CONDITIONS OF PARTICLE SIZE,
DISPERSION AND STRONG IGNITION SOURCE.

Accidental Release

Spill Release Procedures:CLEAN-UP BY VACUUMING, WET DUSTMOP, OR WET
CLEANUP. AVOID DUST GENERATION. USE AN APPROPRIATE FILTER WITH
VACUUM EQUIPMENT. IF AIRBORNE DUST IS GENERATED, USE AN APPROPRIATE
NIOSH-APPROVED RESPIRATOR DURING CLEAN-UP.

Handling

Handling and Storage Precautions:DO NOT GENERATE DUST.
Other Precautions:MAINTAIN EXPOSURE BELOW THE GIVEN PEL/TLV. USE
INDUSTRIAL HYGIENE MONITORING TO ENSURE THAT USE OF THIS PRODUCT
DOES NOT CREATE EXPOSURE EXCEEDING THE PEL/TLV.

Exposure Controls

Respiratory Protection:USE NIOSH-APPROVED RESPIRABLE FUME RESPIRATOR OR
AIR-SUPPLIED RESPIRATOR WHEN WORKING IN CONFINED SWPACE OR WHERE
LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE BELOW THE
RECOMMENDED EXPOSURE LIM IT.
Ventilation:USE ENOUGH GENERAL VENTILATION AND LOCAL EXHAUST AT THE
WORK SITE TO KEEP THE FUME GASES AND DUSTS DOWN.
Protective Gloves:WEAR HAND PROTECTION.
Eye Protection:WEAR HELMET OR USE FACE SHIELD.
Other Protective Equipment:WEAR HAND, HEAD, AND BODY PROTECTION WHICH
HELP TO PREVENT INJURY FROM RADIATION, AND FLAMES.
Work Hygienic Practices:WASH HANDS TO REMOVE ANY DUSTS.
Supplemental Safety and Health
NONE

Chemical Properties

HCC:N1
Appearance and Odor:WELDING POWDER, METALLIC OVERLAY STEEL.

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:REASONABLY EXPECTED CONSTITUENTS OF
THE FUME WOULD INCLUDE COMPLEX OXIDES OF THE METALS LISTED.

Disposal

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, FULL COMPLIANCE WITH
FEDERAL, STATE, AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.